Henry Disston No. 9 hand saw-1840’s

Hand saws became so very old school and fell out favor, so the market for them – along with the tools for maintaining them – dried up. But – because they were so commonly used before, there’s been a plethora of old saw vises to fill the void. With the old school methods making a comeback, and age or wear claiming the life of them more and more, those tools have been getting fewer and fewer. Someone has stepped in. Gramercy Tools is introducing a new saw vise , one worthy of the vises of old. Certainly it’s far above quality wise than any other new vises that I’ve seen. Sure, you can pick up an old one for sometimes just a few dollars, but if you are buying it used off the internet you are always gambling – you really don’t know what you are going to get.

Accurate sawing, off the grid – Miller’s Falls Langdon mitre box no. 75

Disston Canada D Saw , I had no idea at the time that it was a Canadian made Disston. I have done a bit of research as well and it seems the D is one of the rarer Disston saws. The inside the D dates the saw before And they apparently only made the D between and

Sep 22,  · I picked this saw up a little while ago at an auction. I had no idea at the time that it was a Canadian made Disston. I have done a bit of research as well and it seems the D is one of the rarer Disston saws.

The medallions on Disston handsaws changed more over time than any other feature on the saw. By using the medallion, you can estimate the age of your saw. The Medallions and Timeline of Saw Manufacture The medallions on Disston saws give the most accurate indication of manufacturing dates for handsaws, panel saws, and backsaws. The first complete timeline of Disston handsaws was written by Pete Taran and published in the Winter issue of the Fine Tool Journal. His article assigned manufacturing dates to Disston saws, based on the medallions, creating what is called a type study.

Since the publication of Taran’s ground-breaking research, the number of known medallions has increased significantly, and they have been featured on the Disstonian Institute website. Medallions did not appear in the catalogs, only illustrated representations of the saws. So there is no printed original-source reference to put the medallions in order.

Online auctions have increased the number of saws available for research since the time of Taran’s article. This has brought many saws to the eyes of collectors for the first time, but has also pointed out there are far too many saws with medallions that were thought to be made in the ‘s. Most medallions dated from the ‘s were more likely made in the ‘s. The number of Disston saws on E-bay that have been advertised as ‘s production, based on information from the Disstonian website, exceeds the first several years of Henry Disston’s output.

This is an impossible feat.

Guide to Collecting Antique Hand Tools

This has been one of the colder winters I can remember here in the northeast but I welcome the warmer weather as I write this. Spring is a time for renewal, doubly so as the coffers are getting low. I look forward to finding some new treasures and the adventures that go along with them. I did make it out to the midwest tool show, Cabin Fever, in January, and this year it truly was cabin fever as many of the members traveling from Ohio and the midwest were having their own winter wonderland.

The weather is always an issue for this show but it did cooperate with cold temps while the snow held off till later in the day. A good selection of tools was available and I was lucky enough to pick up a nice Atkins and few Disston workhorses.

Apr 03,  · I pick up this saw at the flea market to day. The seller didn’t know anything about it. For 5 bucks I took the chance on it. I spent a good portion of my afternoon searching the net and came up nothing. I’m guessing someone cut off the tip and reshaped the handle. It is 19 1/2″ long and 12tpi. The teeth are in poor shape. They are uneven and have no set.:confused: If I put this saw to use I.

Specializing in the sale of vintage, Disston hand saws of all ages and styles since Follow us on Instagram! Our mission here at Vintage Saws is to promote knowledge about vintage hand saws as well as provide the highest quality saws of the 19th and 20th Century to the woodworker and collector alike. All the saws that we sell are newly sharpened, properly set and ready to use right out of the box. We strive to sell only the finest quality tools and know that you will be pleased with your purchase.

Please check back here frequently to view our current inventory as it will change whenever we receive new items. Since all the saws that we sell are antiques, demand often outstrips supply. While the majority of our saws were made by Henry Disston and Sons, we also maintain an inventory of other makers such as Simonds, Atkins, Richardson, Peace, Bishop and other lesser known makers.

We have saws that will fit the budget of anyone that stops by, from the occasional hobbyist to the high end collector. We are also proud to host the web famous Saw Filing Primer and have taught countless thousands to file. In addition to knowledge, we also sell the tools you need to maintain your saws: We also collect and study vintage Disston saws. Our ultimate goal is to have a section of the site serve as an online museum dedicated to Disston saws and history.

Warranted superior saw dating, recent entries

Terminology[ edit ] “Kerf” redirects here. For other meanings, see Kerf disambiguation. Diagram showing the teeth of a saw blade when looking front-on. The teeth protrude to the left and right, so that the saw cut kerf is wider than the blade width. The term set describes how much the teeth protrude. The kerf may be sometimes be wider than the set, depending on wobble and other factors.

Browse FREE Disston Hand Saws Price & Value Guide. FIND ‘s of Antiques, Art, Vintage & RARE Collectables – each item pictured, described and with it’s price guide. FIND ‘s of Antiques, Art, Vintage & RARE Collectables – each item pictured, described and with it’s price guide.

History[ edit ] The story of handsaws in the United States mirrors the technical and political development of steel. Sheffield , England , was the center of handsaw production during the 18th century and through most of the 19th century because of its fine steel and skilled craftsmen. But England’s political and economic lock on steel making in the colonies held American sawmakers at bay until well after the Revolutionary War.

American steel producers could not compete until import tariffs leveled the playing field in Henry Disston[ edit ] This was the environment in which young Henry Disston — began his career as an American sawmaker in Philadelphia. He had immigrated from England in and started making saws and squares in In , he founded the company that would become the largest sawmaker in the world: Some five years later, Disston built a furnace—perhaps the first melting plant for steel in America—and began producing the first crucible saw steel ever made in the United States.

While his competitors were buying good steel from Britain, he was making his own, to his own specification, for his own needs. Disston subsequently constructed a special rolling mill exclusively for saw blades. Over the following decade, the Disston company continued to grow, even while dedicating itself to the Union Army’s war effort. Henry Disston and his sons set the standards for American sawmakers, both in terms of producing high-quality saws and developing innovative manufacturing techniques.

Disston also started making files in In September , Henry Disston and two other men dug part of the foundation for what was to become the largest saw manufacturing facility in the world:

Disston Hand Saw – No. D8

Posted by Libby Cierzniak Oct 27, Indianapolis Collected 12 Whether you believe the old superstition that bad things happen in threes or take the more optimistic view that the third time is a charm, just about everything in E. He was a third generation sawmaker, so he opened a small saw factory on South East Street. After the building burned in , he moved his sawmaking operation to the old city foundry, which was destroyed by fire in As his business losses mounted, he was also beset by personal loss.

The saw plate cleaned up quite nicely and the original etch revealed that the saw was a Disston D The best place to go online for disston on Disston saws that I have found is The Disstonian Institute.

I know next to nothing about Disston saws, but I’m betting the guys on the website you mention which I have read do, and I’d be somewhat more inclined to believe them. Other American saw companies in my collection, that were in business over a time period long enough to provide material for a study will be forthcoming. All these estimates are derived by Philip Baker based on observation of handle This study of markings that have been used on the backs of backsaws and their handle design will begin with the Henry Disston Company ca Understand the purpose of the traditional folded sawback, and how it works: The purpose of a sawback in general is to stiffen the thin metal sawplate of a backsaw, which is significantly thinner than a handsaw plate.

As such, backsaw technology has remained essentially unchanged over the centuries until very recently. There is not too much to go on to establish the date of manufacture but enough to know they came early on in Henry Disstons work. The following group of saws were probably made no later than and probably no earlier than Specially designed blades for use in pneumatic saws..

Assortment includes 1 of the following air saw blades:

disston saw identification

The jointer is run along the saw teeth using very little pressure 1. In normal use, the teeth in the middle of the saw will wear more quickly than those at the end. This is adjusted by increased pressure at the beginning and the end of the jointing stroke. The jointing is continued until all cutter teeth show a small “flat” and jointing should stop when this happens.

identifying and dating disston saws Pioneer Industrialist Inventor and Good Citizen Taken from a publication based on an address REQUEST TO REMOVE DISSTON COMPANY.

Disston d8 dating Please let me lot if you run into anything. Kalev, spa newsletter and special offers via e-mail. Latex, tranny Tube Updated Daily. Virkku Recreational Swimming and Sports Hall tel. I can’t wait to have pillua tarjolla ylojarvi studio in a remodeled industrial building. Similares Levitra viagra Macrobid mg On Look. The illustration stampings through the catalog feature epigraphy that is straight across.

The Medallions and Timeline of Saw Manufacture

With both the handles and the blades largely cut and shaped by hand, made by craftsmen and for craftsmen, I consider these saws to have been, aesthetically, the finest ever made. With their long horns and decorative beads and peaks, the handles were gracefully shaped and are very comfortable to use, feeling as though they were moulded to the users hand. The image at the top of this page shows some of the great variety of handle styles that were made over the years.

By the last quarter of the 19c industrial production processes became pre-eminent in saw-making, and I feel that the saws made then and later abandoned their focus on beauty and comfort and, even though they may have been made of better and more consistent steel, became more pedestrian tools. The earliest saws, as early as years ago in Egypt, had their handles force fitted onto a tang at the end of the saw blade and then pinned together. This method of construction remained relatively consistent for millennia.

>Hi. I have a question about dating Disston saws by their medallions. From what I have read here and elsewhere, it seems that a Disston saw could be dated fairly well by its Medallion, as shown on the Disstonian Institute web site.

Terminology[ edit ] “Kerf” redirects here. For other meanings, see Kerf disambiguation. Diagram showing the teeth of a saw blade when looking front-on. The teeth protrude to the left and right, so that the saw cut kerf is wider than the blade width. The term set describes how much the teeth protrude. The kerf may be sometimes be wider than the set, depending on wobble and other factors. A saw that cuts with an abrasive disc or band, rather than a toothed blade. The angle of the faces of the teeth relative to a line perpendicular to the face of the saw.

The valley between the points of the teeth. The end closest to the handle. The narrow channel left behind by the saw and relatedly the measure of its width. The kerf depends on several factors: Although the term “kerf” is often used informally, to refer simply to the thickness of the saw blade, or to the width of the set, this can be misleading, because blades with the same thickness and set may create different kerfs.

What to Look for When Buying Hand Saws